Pro-Lite Spokes, Wheelbags & Spoke Tool |
|
- Super high strength Swedish stainless steel (Inox) spokes
- As used to build the Pro-Lite range of wheels
- Available in double butted and aero formats
|
|
Protect your investment with our double padded wheel bag.
|
|
Allows easy access to nipples that are enclosed in deep section rims. Machined to the highest of tolerances and will prove to be an invaluable item for any cyclist's toolkit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Perdrosa Forged Stem |
|
|
|
Our entry level racing stem, aimed at club level bikes, this stem still offers features usually associated with considerably higher priced models.
|
One piece forged to maximise strength and rigidity. Incorporates the Pro-Lite standard OSB (opposing steerer bolt) system to allow for uniform stem to steerer pressure. 4 bolt open front plate for rapid assembly/disassembly and maximum contact surface area.
|
4 bolt for better load spreading at the clamp |
3D forged for greater accuracy |
Lengths: 60 - 120mm in 10mm steps |
Weight: 148 g /100 mm (V) |
|
|
|
|
|
|
|
Barbore |
31.8 mm |
Angle |
± 6° (60-80) |
|
± 10° (90-120) |
|
|
Extension |
CODE |
60 mm |
PL-RS-OS-D1-60 |
70 mm |
PL-RS-OS-D1-70 |
80 mm |
PL-RS-OS-D1-80 |
|
|
90 mm |
PL-RS-OS-D1-90 |
100 mm |
PL-RS-OS-D1-100 |
110 mm |
PL-RS-OS-D1-110 |
120 mm |
PL-RS-OS-D1-120 |
130 mm |
PL-RS-OS-D1-130 |
|
|
|
Read more...
|
|
|
|
|
Elbrus 6061 / Carbon Stem |
|
|
|
Designed to compliment our range of alloy and carbon matrix road bars this beautifully sculptured stem fulfils the requirement for cyclists with the almost insatiable desire to utilise carbon fibre.
|
Using a platform of race proven ultra-lite 6061 aluminium we carefully blend with high modulus carbon fibre casing to achieve a low weight, high strength product with a long service life.
|
4 bolts for better load spreading at the clamp |
CNC machined for greater accuracy |
Blend of carbon and alloy for lightness |
Carbon also gives shock absorption |
Lengths: 90 - 130mm in 10mm steps |
|
Weight: 155 g /100 mm (V) |
|
|
|
|
|
Barbore |
31.8 mm |
Angle |
± 10° |
|
|
Extension |
CODE |
90 mm |
PL-RS-OS-ACB-90 |
100 mm |
PL-RS-OS-ACB-100 |
110 mm |
PL-RS-OS-ACB-110 |
120 mm |
PL-RS-OS-ACB-120 |
130 mm |
PL-RS-OS-ACB-130 |
|
|
|
Read more...
|
|
|
|
|
Pelmo 7075 CNC Stem |
|
|
|
Where aesthetics are as important as function this model will appeal to the most demanding requirements on both counts.. |
CNC machined from a single forged billet of 7075 aerospace aluminium, this sleek stem has all of the usual Pro-Lite features including OSB (opposing stem bolt) and 4 bolt front plate system, along with super clean lines making it look good on even the most expensive bicycles.
|
4 bolts for better load spreading at the clamp |
CNC machined for greater accuracy |
Satin anodised ultimate high tech finish. |
Lengths: 90 - 120mm in 10mm steps |
Weight: 116g / 100 mm (V) |
|
|
|
|
|
|
Barbore |
31.8 mm |
Angle |
± 6° |
|
|
Extension |
CODE |
90 mm |
PL-RS-OS-NC6-90 |
100 mm |
PL-RS-OS-NC6-100 |
110 mm |
PL-RS-OS-NC6-110 |
120 mm |
PL-RS-OS-NC6-120 |
|
|
|
Read more...
|
|
|
|
|
Brunico skewers |
|
Super Light skewers with carbon fittings
High Modulus 3k Carbon Level
Suitable for all road wheels
Improved value with high tensile strength alloys
New lighter weight for 2010!
|
|
|
SERIES CODE |
|
|
Brunico PL-HB-QR |
|
|
|
|
|
Weight: 38g / Rear (V)
|
|
|
Weight: 43g / Front (V) |
|
|
|
|
Read more...
|
|
|
<< Start < Previous 11 12 13 14 15 16 17 18 19 20 Next > End >>
|
Results 163 - 171 of 208 |